Rebuilding A Robinson R22 Helicopter Part 3

30. 07. 2020
892 690 zhlédnutí

This is getting more and more insane! As we dig into this Robinson Helicopter, we discovery some pretty crazy things. We are learning so much and we couldn't be more happier to get one step closer to getting a pilots license. However, we still got a good bit to go to get this beast overhauled, but when its complete thats when well experience some freedom flying. We cant wait to get this helicopter complete! Thanks For Watching!!!
-P.O. Box 37
Rossville,GA 30741
-Music credits:
Song: ROFEU - Midnight Lover
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link:
Song: Thomas Gresen - Good Pace
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link:
Song: LiQWYD - It Will Be Ok
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link:
Song: MBB - Summer
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link:
Song: Marin Hoxha & Clasio - Spirit
Music provided by Vlog No Copyright Music.
Video Link:
Song: MusicbyAden - Happy
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link:
Song: Sappheiros - Truth
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution 3.0 Unported
Video Link:

  • Are you guys still going make video of helicopter?

    Aidan WilsonAidan WilsonPřed 6 dny
  • When are you going to start restore the helicopter again? :)

    markus gobergmarkus gobergPřed 11 dny
  • Your very lucky to have your own r22 and to work on it I have trying to get my helicopter flying licence for many years although I would not choose a robinson due to its 12 year 2200 hour strip down I would choose either a enstrom f28A or a Hiller uh 12 b or C or any Hiller/as both makes plus the Hughes /Schweizer 300c all have either on condition parts or no Callander time parts, enstrom have only 1 Callander time life part and just 9 over haul parts they just get replaced when they're running time hours are up so it means a enstrom could be flown up to 20 to 30 years before any heavy costs and replacement parts are needed, all best from Peter in the UK

    peter rowcliffepeter rowcliffePřed 12 dny
  • Why does the shirt say 2015.

    Tate GoffTate GoffPřed 16 dny
  • You need an FAA A and P mechanic with you every step of the way on this. That guy that sold you this thing probably didn't clue you in on what you were getting yourselves into.

    bellboy407bellboy407Před 18 dny
  • Bet the Squad saved a ton of money by doing all that work themselves. Plus the educational value is priceless!

    SkyBaumSkyBaumPřed 23 dny
  • When the part 4 it will come ?

  • What happened to this build ? Was it put on the shelf for a while ?

    L ZedL ZedPřed 28 dny
  • I watch this feed so I can remember how to be YOUNG and wide eyed, thank you

    Roger GonsoulinRoger GonsoulinPřed měsícem
  • a motor like that is used on airboats, my father in law has one on his!

    Ethan MacherasEthan MacherasPřed měsícem
  • Outch. My flight engineer stomach turned at 7:58. You do not want to use a wrench on a aircraft. And most definitely you DO NOT want tools to touch components like the gearbox. Not even making a small mark. Before you know it you have a micro crack in the casting. Even the smalest mark on a gearbox usually means blending out shot peen and Eddy current testing. And 10:25 removing cotter pin it leaves a mark on the tail shaft component. Power tools usually a no-no for anything but panels etc. You want to feel the things you disassemble so you may pick up potentially problems with the threads or bindings. Big different between car and a helicopter: A car is made as stirdy as it needs to be. A helicopter is made as flimsy as it needs to be...

    Jan E. LohneJan E. LohnePřed měsícem
  • Check playlist of some older builds:

  • So what this series is over now?

    Jonny 6631Jonny 6631Před měsícem
  • Where is the helicopter

    Jovan no pasa nadaJovan no pasa nadaPřed měsícem
  • part 2 is not available in Denmark 🥺🥺

    Rasmus NielsenRasmus NielsenPřed měsícem
  • 🔥🔥🔥🔥🔥🔥🔥

    Jair RamosJair RamosPřed měsícem
  • Bone Apple teeth 😂

    Lildarkcar177Lildarkcar177Před měsícem
  • This must be called next level goonzquad . I like it.

    Alphanoss GibsonAlphanoss GibsonPřed měsícem
  • When we going to see more helicopter episodes? John from uk

    John DaviesJohn DaviesPřed měsícem
  • TRUMP 2020

  • Either you wear a mask properly or dont wear it at all. And if a shop has a mask requirement, wear it properly. Not to sound like a cop but that shit really does decrease the chance of YOU catching the virus and also of you accidentally spreading it to some old grandma who might die from it by like 90%

    CaptainCaptainPřed měsícem
  • In the next build "We put on a Army Trex 4 inch exhaust system and a protech supercharger. no way!!!! duuudeeee. and were just gonna send it to the moon" R-22 woooooooooopshhhh

    Highstakes187Highstakes187Před měsícem
  • where are the next part of the helecopter

    Ricardo SouzaRicardo SouzaPřed měsícem
  • You guys are crazy!😍

    gta5 finder memegta5 finder memePřed měsícem
  • I thing It will be a goonzquad air controol

    P Jagadishwar 2026-27HP Jagadishwar 2026-27HPřed měsícem
  • Next is rebuilding the crashed planes from 911

    That1-_-guy.That1-_-guy.Před měsícem
  • Hope you got life insurance cause if that thing fails....

    Sonykurupt GamingSonykurupt GamingPřed měsícem
  • 3 years later "Rebuilding the Falcon 9"

    FillaaaaaFillaaaaaPřed měsícem
  • The R22 helicopter shirt is sick!

    Jackson CollinsJackson CollinsPřed 2 měsíci
  • I’m loving this series and can’t wait to see how it turns out!

    Wesley DeckerWesley DeckerPřed 2 měsíci
  • You talk talk talk talk talk and talk ... and finally get to the point 😊

    ster88ster88Před 2 měsíci
  • Do you not need an a&p to document and sign off on that aircraft ?

    \Dylan \Randolph\Dylan \RandolphPřed 2 měsíci
  • How about doing a can am spider to see what you guys can do with it

    Gale ConnorsGale ConnorsPřed 2 měsíci
  • Imagine you have a rust hole in the exhaust and you turn on the heat and it starts blowing exhaust inside the cockpit!

    GraepixelsGraepixelsPřed 2 měsíci
  • Goonsquad boys, If you can contact me I have a proposal for you that I know you will be interested in. Message me

    James GlassJames GlassPřed 2 měsíci
  • You pretty much have a volkswagen beetle engine and heater assembly in your helicopter.

    Bobdingle25Bobdingle25Před 2 měsíci
  • Im also FAA AMT, whos going to sign off all your repairs?

    R. GuthrieR. GuthriePřed 2 měsíci
  • “ 🦴 🍏 🦷 “ 🤪🤣

    AwoL_ BrutalAwoL_ BrutalPřed 2 měsíci
  • One of my oldest friends dad used to rebuild crashed helikopters. Mainly Hughes H-500. We used to hang in his hangar. This is AWESOME! Brings back so many memories!

    BalleknackBalleknackPřed 2 měsíci
  • Mustang 🧐

    Nobdoy IndustriesNobdoy IndustriesPřed 2 měsíci
  • “Gotta eat healthy “ First thing they see is cake and take four

    Ricardo DiazRicardo DiazPřed 2 měsíci
  • Pops Rocks!!!

    Charles LinvilleCharles LinvillePřed 2 měsíci
  • You need a A&P mechanics license from the FAA to rebuild these things. Unless, it's an experimental aircraft. Then you have to follow a bunch of regulations for experimental aircraft. Aircraft are highly regulated.

    Bradley TordoffBradley TordoffPřed 2 měsíci
  • Iam assuming you have a A&P supervising you guys and willing to sign it off probably need a IA also excellent work love all of the videos

    jdhiner1jdhiner1Před 2 měsíci
  • As a pilot, no offense I would never fly in this or suggest anyone actually ever do.

    TheNorthernAviatorTheNorthernAviatorPřed 2 měsíci
  • It's been a few weeks now so hopefully some of those parts have already been shipped out and are soon going to make their return!

    Octane Street - Apprentice MechanicOctane Street - Apprentice MechanicPřed 2 měsíci
  • When are you coming out with part 4?!?

    Jake PlayzJake PlayzPřed 2 měsíci
  • Um, don't you need someone with a A&P License to do this work, legally?

    Nathan BerryNathan BerryPřed 2 měsíci
  • Just the fact that you guys are using an adjustable wrench to disassemble this entire thing suggests you might not be the right people to be doing this. This is life or death guys, not the realm for adjustables and duct tape!

  • Hey guys love watching this build makes me want to do it with a 22/44/66. I too am a a&p mechanic and you guys need to get you some ignition wrenches specifically a 7/32 for the r22 baffle nuts makes things way easier I do forget the size of the transmission bolts but for reinstallation I highly recommend getting the correct size wrench for the head of the bolt when you torque the nut to Robinson heli torque specs. Can’t wait to see more. Fun watching.

    joshua carverjoshua carverPřed 2 měsíci
  • 7:18

    Fadan Nasir GAMINGSFadan Nasir GAMINGSPřed 2 měsíci
  • DANG!!! DUDE!!!!

  • Man I don't like this at all. Shit ain't safe.

    andrew colemanandrew colemanPřed 2 měsíci
  • Next video - Buying a Robinson R22 for parts.. Bone Appleteeth errone!

    sonataarctica1979sonataarctica1979Před 2 měsíci
  • 6:53 no ones ghonna talk about how my mans said we got our vegetables im dead

    Mr sweatMr sweatPřed 2 měsíci
  • The IA must have some sized gonads signing off these 2 goons work.

    Betty SwollocksBetty SwollocksPřed 2 měsíci

    Tim MitchellTim MitchellPřed 2 měsíci
  • Learn how to wear a mask ffs. It's not effective if it's not covering your nose. This isn't hard.

    P MP MPřed 2 měsíci
  • Hmmm dont mind me just casually lifting a helicopter 1:51

    Seo3738Seo3738Před 2 měsíci
  • Too much for me, I sure don’t want to be flying that. I know it’s it’s just nuts and bolts but I got lost with everything you guys took off

    Slackerz SincitySlackerz SincityPřed 2 měsíci
  • Take note of all serial numbered parts that you send out. good to keep for your records & logbook.

    B6jfkmxB6jfkmxPřed 2 měsíci
  • you'll wanna invest in buying safety wire pliers for when you guys start putting things back together. SK/Snap on make good ones. Get the fully reversible one.

    B6jfkmxB6jfkmxPřed 2 měsíci
  • Paint the helecopter in jeep red and white goonsquad logo

    Sanchita Naik gaonkarSanchita Naik gaonkarPřed 2 měsíci
  • Paint the helecopter in jeep red and white goonsquad logo

    Sanchita Naik gaonkarSanchita Naik gaonkarPřed 2 měsíci
  • These thing fly and then fall and you suddenly feel like hard is the Earth when you fall on it.

    pangrac1pangrac1Před 2 měsíci
  • Really nice quality video keep going boys

    Alireza SadeghiAlireza SadeghiPřed 2 měsíci
  • At 9:55 you pulled up a joint and exposed some yellow material, this is called mastinox or "nastyinox" (spelling) never let that touch your skin, its very carcinogenic. But is a wonderful rust inhibitor.

    Midwest MachinesMidwest MachinesPřed 2 měsíci
  • Isn’t there any regulations in America about rebuilding these things?In Australia you have to bean air engineer at the minimum.

    terry reevesterry reevesPřed 2 měsíci
    • @Chuck Croston I agree totally, my first thoughts were of the FAA and Robinson Helicopter Company. 🤷‍♂️

      Eddie SmithEddie SmithPřed 2 měsíci
    • @Eddie Smith Glad to hear they have someone helping even if they are not being shown. TBH, I am surprised the FAA has not jumped all over them for this. I personally think they need to be more open with what is required for this type of thing and the fact that a garage mechanic is not going to be able to rebuild something like this in a garage for the most part.

      Chuck CrostonChuck CrostonPřed 2 měsíci
    • @Chuck Croston Absolutely correct but, behind the scenes the guys are being supervised and guided with one of the top Robinson Factory certified rebuilders on the entire east coast. I know nothing about these guys but I personally know the one supervising the rebuild and you can rest assured it will be done to factory specs. (P.S. I asked questions about this myself and was informed of the above).

      Eddie SmithEddie SmithPřed 2 měsíci
    • Yes, there are plenty of regulations and they are violating plenty with what they are doing as neither of them are A&P's and they do not have a clue as to what they are doing. In cars, that does not matter but this is a whole different kind of thing they are trying to get into.

      Chuck CrostonChuck CrostonPřed 2 měsíci
  • the parts

    Scp-096Scp-096Před 2 měsíci
  • i see why they no make a part 4

    Scp-096Scp-096Před 2 měsíci
  • oooooooh

    Scp-096Scp-096Před 2 měsíci
  • part 4?

    Scp-096Scp-096Před 2 měsíci
  • vox

    Daily FUTDaily FUTPřed 2 měsíci
  • Careful you guys. Either use austenitic steel for the custom bracket, or paint the other one. You risk to induce ferritic material into the transmission housing and make it corrode real quick!

    Music is LifeMusic is LifePřed 2 měsíci
  • Bone apple teeth man!. new shirt?

    Muteb AlmansourMuteb AlmansourPřed 2 měsíci
  • 1.8K Helicopter Pilots dislike this video.....

    Ben KuehlBen KuehlPřed 2 měsíci
  • Where did y'all get that skrimp Steamer?

    WurmpoolWurmpoolPřed 2 měsíci
  • boneAppleTeeth, man....... such a meme...hehe

    Will ArungaWill ArungaPřed 2 měsíci
  • Boys, boys boys........... complete a very good pilot's course before you even flip the first switch on that thing. Twist and turn=crash and burn.

    Fern NrefFern NrefPřed 2 měsíci
  • I cannot believe the FAA would let this fly. Neither one of the goonsquad has an A&P license which is required to work on aircraft. Any FAA inspector wold refuse to give this a flight certificate.

    william rcmtwilliam rcmtPřed 2 měsíci
  • Great Job fellows. Also thank you for keeping it clean and G rated. Thanks for the great video. I love how you just dive in and figure it out as you go. I've done that on alot of my projects through the years and learned so much.

  • My mom used to yell at me for leaving my socks all over the place, does your mom get pissed about you leaving your cars everywhere?

    Joe TuckerJoe TuckerPřed 2 měsíci
  • Yup been a helicopter mechanic for 25 years and Robinson’s a horrible little thing to work on. Stop the build and sell the parts just walk away.

    jeep guyjeep guyPřed 2 měsíci
  • Some operators put an extra alternator belt on before they reinstall the clutch/ drive assembly. There is a way to tywrap the spare belt out of the way of the rotating flywheel. It saves a lot of time when the original belt breaks or wears out before TBO. You need to have that exhaust system sent out for overhaul too. If a crack develops in the heat muff area, not only will it keep your toes warm, it will put you to sleep...maybe permanently.

    I.R. WayrightI.R. WayrightPřed 2 měsíci
  • It reminds me of an air cooled VW including the heater.

    Steve McluckieSteve McluckiePřed 2 měsíci
  • Mazda rx7 is the strongest engine ever 🤙🏼

    michael nnielsenmichael nnielsenPřed 2 měsíci
  • It’s a rotary engine like Mazda rx6-8

    michael nnielsenmichael nnielsenPřed 2 měsíci
  • Is the helicopter yours

    Cameron TurnerCameron TurnerPřed 2 měsíci
  • I love to sound that the jeep makes

    Junmarion NixJunmarion NixPřed 2 měsíci
  • Daaaaaaaang son! Can't wait to see you guys install the Armytrix exhaust on that R22. It's going to sound soooo sick! LOL

    Steve126aSteve126aPřed 2 měsíci
  • Bros careful with that stuff man please enjoy it but be very careful.

    Jeff KakashiJeff KakashiPřed 2 měsíci
  • Can not wait to see more and more of the forklift

    John WaltersJohn WaltersPřed 2 měsíci
  • Are you filming at your house or workshop

    ARCHIE sweatsARCHIE sweatsPřed 2 měsíci
  • "Bone apple teeth Man!" LOL!

    if66was99if66was99Před 2 měsíci
  • Wait it's a boxer engine awesome

    Subi DriverSubi DriverPřed 2 měsíci
  • Coconut 😍😍... coconut tree kerala"s official tree.. Welcome to india

    BIJU P FBIJU P FPřed 2 měsíci
  • Rerun...

    Joey JaquezJoey JaquezPřed 2 měsíci
  • His hand movements are funny...

    izzy 706izzy 706Před 2 měsíci
  • Ouch, using an adjustable wrench on an aircraft.....sinners !!

    r lr lPřed 2 měsíci
  • Howhl cooler :)

    Matt TMatt TPřed 2 měsíci